Source tagging is the process in which disposable EAS anti-theft labels are incorporated into merchandise at the manufacturing, packaging, or distributing level—in other words, at the source. With source tagging, EAS anti-theft labels can be applied to a much wider range of goods than with in-store tagging. In addition, tagging compliance is more consistent that important manufacturer information is not covered, the tag applied at the source does not damage goods, and the level of security is strengthened as tags are hidden inside the goods. Centralized label application results in broader tagging which is more effective and efficient. There is virtually no product that cannot be source-tagged. The Sensormatic Ultra.Max technology works with foils and metals, and it has a small label footprint. It is reliably deactivated, and can be reactivated when needed as with customer returns. Products being source tagged today cover most categories including automotive aftermarket, apparel, pharmaceuticals, health and beauty care items, jewelry, watches, home center products, general merchandise, toys, sporting goods, books, batteries, consumer electronics, and grocery items.
Product codes
ZLdrs1 White
ZLdrs2 Barcode
ZLdrs3 Black
Label Dimension
Label Length 45.21mm+/-0.5mm（1.78”+/-0.020”）
Label Width 10.67mm+/-0.5mm（0.420”+/-0.020”）
Label Thickness(excluding Liner) 1.89mm（0.074”）
Label Thickness(including Liner) 2.00mm（0.79”）
Environmental Constraints
Temperature Maximal temperature of 50℃(122℉)for 96 hours at 80% RH;
Humidity Up to 80% humidity at 50℃(122℉) for 96 hours;
Shelf Life Two years from the date of manufacturing when stored between 50℃-32℃(60℉-90℉),30-80%RH
Packing Specifications
|
Quantity of labels per sheet |
108 |
|
Quantity of Sheets per carton |
5000-unit case |
|
Carton weight |
2.76kg (6.07 ibs.)ext.carton |
|
Dimension of carton |
27.9×20×11cm(11×8×4.5”)ext.cubic feet |
|
Quantity of cartons per pallet |
255 |
Materials
|
Plastic Housing |
Polystyrene/ polyethylene 0.3mm(0.012”)thick |
|
Magnetic Acoustic
Resonator(2) |
Proprietary resonant magnetic material.
Amorphous alloy, mainly made by iron, but also nickel,cobalt, boron and silicon. |
|
Laminate |
Low Density Polyethylene/ Polyester/ Polyethylene 0.127mm(0.0050”) |
|
Bias |
Proprietary semi-hard magnetic material containing iron, nickel and chromium |
|
Laminate |
Low Density Polyethylene/ Polyester 0.119mm(0.0047”) |
|
Adhesive |
Double-coated, rubber-based adhesive 2.4mil thick per side minimum peel strength of 80 oz./in. |
|
Release Liner |
Double-sided, silicon-coated 80 Ib. bleached craft liner 0.114mm(0.0045”)thick |
Instructions
Place within 7.6cm(3”)of bar code.
Place in least conspicuous location.
Do not cover warnings, expiration dates or other important consumer information.
Label placement should be in accordance with Source Tagging Guidelines.
It is recommended that the surface to which the label is applied should be clear and free of all dirt, grease, oil, etc.
More than 100mg of ambient magnetic field of labeled product may reduce label performance.
Do not expose to the label to magnetic field stronger than 8 Gauss.
Individual analysis is recommend for placement on metal products.
|
